Copying media files from a Canon video camera into your project folder

Before importing media files into Premiere, you'll need copy these files into your project folder. Note: Be sure to follow the instructions for the correct camera (XA10 or XA11.)

Canon Vixia XA10

1. Connect your project folder SD card to the PC.

2. Connect the camera to your PC using the USB cable. (The USB miniport on the camera is under the hand flap.)

3. Turn the camera on.

4. On camera, open the side panel.

5. Press Camera to Play button.

6. On the camera's touch screen, press Built-in Mem. (Do not disconnect or turn off the camera without properly ejecting it from your PC.)

7. On the PC, Navigate to your project folder in an Explorer window. Then open a second Explorer window. Select Canon in the left pane of the Explorer window.

8. Copy the AVCHD folder into your project folder.

9. After AVCHD has copied into your project folder, eject the video camera.

10. Disconnect the camera from your PC.

11. In your project folder, rename AVCHD. Follow JAMS file and folder naming conventions.

12. Rename your MTS files.

Canon Vixia XA11, XA15, XA30

1. Connect your project folder SD card to the PC.

2. Connect the video camera to your PC using the USB cable. (The USB miniport on the camera is under the front flap.) Note: Do not remove the SD card from the camera.

3. On the camera, set the CAMERA/OFF/MEDIA switch to MEDIA.

4. Navigate to your project folder in an Explorer window. Then open a second Explorer window. Select Canon in the left pane of the Explorer window.

5. Copy the DCIM folder into your project folder. The MP4 files you will import into your project file are in the 101_XXXX subfolder.

6. After DCIM has copied into your project folder, eject the video camera.

7. Disconnect the camera from the PC.

Copying media files from Canon Vixia XA10 video camera to project folder.